Product Colors:

Sample 1

Sample 2

Sample 3

Sample 4

Sample 5

Standard Twill Tapes:

Deluxe Decorative Tapes:

Shipping Information:

* All fields below are required

Name

Address

City

State

ZIP

E-mail

#100
Bright White
#101
Pure White
#102
Bone
#103
Antique White
#105
Alabaster
#106
Bleached
#107
Natural
#108
Light Oak
#109
Sugar Maple
#110
Golden Oak
#111
Pecan
#112
Cherry
#113
Walnut
#114
Cactus Green
#115
Smoke Grey
#116
Black
#117
Mahogany

Standard Twill Cloth Tape Colors

Alice Blue
Black
Canary
Capuchino
Chocolate
Dark Beige
Dark Green
Duck White
Gray
Fawn
Mulberry
Pastel Green
Pink
Red
Royal Blue
Russett
White

Deluxe Decorative Cloth Tape Colors

Finesse Natural
Finesse White
Tempo Buff
Tempo Cream
Crochet Blue
Crochet Blush
Crochet Celadon
Crochet Cream
Crochet White
Basketweave Straw
Basketweave Spruce
Bead Blue
Bead Sand
Cable Biscuit
Cable Fawn
Desert Sahara
Desert Wave

Color Disclaimer

Factory Specifications

Minimum Width: 9-1/2" (after factory deductions)
Maximum Width (single blind): 96"
Minimum Height: 10"
Maximum Height: 120"
Headrail Size: 2" X 2-1/4"
Minimum mounting Space: 1-1/8"
Flush Mounting Space: 3"
Outside mount flat space: 2-1/4"
Valance returns: 2-7/8"

Factory deductions

Inside Mount

Headrail: 1/2"
Slats: 1/2"
Valance: 1/8"

Outside Mount

Headrail: none
Slats: none
Valance: add 1-1/2"

Hold down brackets

Brackets to hold bottom rail stationary. Comonly used on door mounted blinds.

Spacer blocks

Placed between mounting brackets and mounting surface, spacer blocks add 1/4" between the blind and the mounting surface. Most commonly used on door mounted blinds.

2 on 1 headrail

A 2-on-1 split blind is two separately functioning blinds mounted on the same headrail with a one-piece valance.2-on-1 splits are sometimes necessary on large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the weight of the materials when lifted.In other cases a split blind may be optimal for the installation. If you have a mullion, or divider in the window and wish to divide the window into two halves that can be operated separately a split blind would be the solution.

3 on 1 headrail

A 3-on-1 split blind is three separately functioning blinds mounted on the same headrail with a one-piece valance. 2 or 3-on-1 splits are sometimes necessary on large widths because the product can become stressed and possibly begin to warp over time. The lift mechanism can be over stressed as well on large blinds due to the weight of the materials when lifted. In other cases a split blind may be optimal for the installation. If you have mullions, or dividers in the window and wish to divide the window into separate parts that can be operated separately a split blind would be the solution.

motorized tilter kit

Control hard-to-reach windows and rooms filled with windows at the touch of a button. The motor is concealed in the headrail and the battery holder may be placed inside the headrail or may be positioned up to 59" away from the receiver.

remote control

remote control for motorized tilt

Tile Cutout

A tile cut-out is used to fit a blind where a portion of the window opening narrows. Typically, this is due to a tiled back splash.

RollEase

The blind is raised or lowered and the slats are tilted by operating the single control cord. Pulling on one side of the cord releases the clutch and adjusts the blind?s height by wrapping lift cords onto a rotating and traversing shaft. The shaft?s traversing motion ensures that the lift cords wrap evenly onto the shaft without overlapping, keeping the blind absolutely level. When the control cord is released, the clutch then automatically locks and holds the blind in its new position. Gently pulling on either side of the control cord will adjust the angle of the slats.

Routeless

Reduce light and ensure privacy with our Routeless Construction feature. Slats are notched on the back side at all ladder positions. Top slat is notched at each ladder position in the front and back of slat thus eliminating the need for holes or perforations in the slats.

Width:
Length:
Product Color:
	Oversize fee (greater than 96"):
Mount Position:	Outside Inside
Tilt Control:	Cord Wand
Tilt Position:	Left Right
Lift Position:	Left Right
Blinds on one headrail:	(Enter the width of each blind and position of the tilt and lift controls in the blank box for comments at the bottom of the page)
Standard Decorative Cloth Tape:
Deluxe Decorative Cloth Tape:
RollEase Lift System:	Yes No
Routeless Construction:	Yes No
Cordless:	Yes No
Motorized Kit (with remote):	Yes No
Hold Down Brackets:	Yes No
Extension Brackets:	Yes No
Spacer Blocks:	Yes No

Room Name:
Window #:
Notes:
Quantity:
Unit price:
Total price:

Wood Blinds 2" Premium

Need guidance?